AstoCAD 2026.11.01 changelog


Everything new in AstoCAD since build 2026.09.01.

Highlights

  • Assembly: multi body dynamics. The Simulation task runs real dynamics, with mass and inertia from materials, loads and torques, gravity, initial velocities, contacts, joint friction, events, time profiles for motors and loads, joint reactions, energy and power results, and point measurements with trajectories.
  • Sketcher: layers. Visibility, locking, color, line pattern and width per layer, and a per-layer choice to use constraints or not. Hidden unless “Show layers” is enabled.
  • Sketcher: cosmetics. Rich text, hatches and leader lines in sketches, on layers, mirrored in TechDraw views. Hidden unless “Show cosmetics” is enabled.
  • Sketcher: Blocks. The Symbols tool became Blocks: save selected geometry to a block library and insert it in any sketch, with Reload From File.
  • Sketcher: nested groups. #28276
  • Assembly: top-down external geometry. While editing a part’s sketch in place in an assembly, pick geometry of the other parts as external geometry. No helper objects and no cyclic dependency. #17951
  • Assembly: Isolate Selection, with an Isolation task box and End Isolation command. #12142
  • Surface: Gordon surfaces, freehand B-splines and intersection curves.
  • PartDesign: Pad and Pocket up to a vertex or datum point. #5724
  • Part: symmetric option for linear and polar patterns. #10442
  • Gui: Recompute All command. #17589

Assembly

New

  • Multi body dynamics in the Simulation task (Settings, Motions, Loads, Initial, Contacts, Friction, Events and Results tabs), with Automatic, Kinematics and Dynamics analysis modes.
  • Contacts between a pair, between component sets, within a set, or across the whole assembly; contacts also stop parts while dragging.
  • Time profiles for motors and loads: constant, segments, data points (paste or CSV import) or expression, with live preview.
  • Point measurements: trajectory in the 3D view, position, velocity and acceleration, table, plot and CSV export.
  • Sketches edited in place can reference other assembly components as external geometry. #17951
  • Isolate Selection command, an Isolation task box and End Isolation command. #12142
  • Nested joint folders.
  • Revolute angle limits up to ยฑ360ยฐ. #30123
  • Root datums without an attachment extension.

Fixes

  • Fixed a crash deleting a sub-assembly used by an assembly link.
  • Fixed drag translation when the assembly placement is not identity. #31083
  • No drag on a failed solver system. #33405
  • Undo of a solve no longer restores placements of deleted parts.
  • Assembly links that link to their own dependents are rejected.
  • The rack marker yaw is applied in the rack frame. #30887
  • Joint tasks are cancelled in their owning document; solver message joint labels are decoded as UTF-8.
  • A missing joint view provider is initialized on restore. #33697
  • Missing point measurement view providers are initialized on edit.
  • Rigid groups: member updates wait until properties exist; too-small selections keep the transaction.
  • Real assemblies are identified independently of Type metadata. #32650
  • Plain groups are traversed when listing component candidates. #26537
  • Exploded view lines start where the previous step ended. #29179
  • The active exploded-view task is kept on reentry. #32494
  • Exploded-view hover alignment stays visible.
  • BOM creation is disabled when no document is active. #33117
  • Bill of materials: mirrored components are classified by their actual scale, quantities are grouped only among direct siblings, component files with the same filename are distinguished, and standard columns restored through the menu persist.
  • The Insert Component file dialog starts in a useful folder. #33091
  • Insert Component: pending insertions are rebound after the list is rebuilt, and recorded macros keep complete placements, rigid state, the source document and escaped labels.
  • Generated property settings quote strings and record standard integer properties; ASMT export paths are quoted.
  • Isolation is preserved when a Python sequence raises.
  • Simulation study arguments are validated before use.

Sketcher

New

  • Layers: visibility, locking, styles and constraint participation per layer, a Layers task panel, layer selectors in the Elements list and a Layer context submenu.
  • Cosmetics: text, hatches and leader lines, with a Cosmetics toolbar and task panel, on layers, and shown in TechDraw views.
  • Blocks (formerly Symbols): Create Block, Insert Block from a library with folders, Fixed Size option and Reload From File.
  • Nested groups. #28276
  • Copy and Mirror copy whole group constraints, and splitting or trimming keeps groups. #32374
  • The Block constraint can be applied to points. #11434
  • Preference to disable autoconstraints by default. #21761
  • Preference to not align the camera on sketch edit. #12895
  • The Text tool remembers the last font and width/height mode. #28303
  • Editing a text preselects it. #33352
  • Paste selects the pasted geometry. #32362
  • Tab in a tool widget field moves to the next field. #27753
  • The Snell’s law constraint uses the datum dialog. #30500
  • Fillet explains why a curve-curve vertex cannot be filleted. #24562
  • The optional persistent symmetry constraint flag is exposed. #31606

Fixes

  • Hidden Sketcher edit-mode toolbars stay hidden.
  • Validate finds gaps at dimensioned vertices. #24335
  • Double-click wire selection stays on one kind of geometry. #32248
  • B-spline Convert to NURBS fixes. #13251
  • Chamfer endpoints stay on the fillet after splitting a corner. #33397 #33522
  • The sketch redraws in edit mode after moving geometry. #18703
  • Moving geometry keeps geometry added since the last solve and rejects infinite or NaN targets.
  • removeAxesAlignment keeps rectangles rectangular and distance conversions valid. #9269
  • Offset constraint lines match their own source line. #28115
  • Perpendicular arc projection uses the correct interval. #26585
  • Perpendicular spline projections keep their direction. #31678
  • Carbon Copy is not repeated while dragging in the tree. #10325
  • Expressions keep working with constraint names that are not identifiers. #6593 #19866
  • Restored transform expressions match their endpoints; addCopy keeps three-geometry constraints; a repeated constraint index is deleted only once.
  • Reorientation detaches the support only once accepted.
  • Autoconstraints are diagnosed at the solved position. #32680
  • setDatum reports the real reason when it fails. #26506
  • The datum transaction is closed when the edit is refused. #17864
  • Navigation button state is cleared before a datum dialog. #33403
  • Interrupted box selections are cleared when leaving edit, and pending rubberbands before panning. #29122
  • Constraint icon picks are returned in the editing placement. #31412
  • Associated constraint filtering includes selected vertices. #28516
  • The constraint list checks constraint indices. #33175
  • Layers rejecting a datum, Reference Lock or Dimension leave unrelated constraints alone.
  • Constraint values keep full binary64 precision when saved. #29210
  • Scalar constraint arguments are converted according to their role.
  • External geometry construction state comes from the defining flag. #28334
  • ExternalTypes stay in step when deleting external links.
  • Section view commands keep Unicode document names. #33325
  • The Python editing API rejects out-of-range indices, and toggleConstruction bounds-checks external ids. #23627
  • Overflowing Group and Text indices and split() on a point are rejected.
  • PropertyVisualLayerList has a Python counterpart. #21516

TechDraw

New

  • Views show sketch cosmetics (text, leaders, hatches) and follow their layers.
  • Radius, diameter and angle dimension labels snap. #13831
  • Face hatch reuses the last hatch settings. #21115
  • Shaded views are rendered with Coin offscreen rendering.
  • Newly inserted symbols and images go on top of the stack. #24820
  • Symbol insertion reads gzip SVGZ files.
  • Draft and Arch views follow the line cap preference. #27866
  • Draft and Arch views honour view locking. #25133
  • A Document window submenu in the view context menus (also in Spreadsheet). #29276
  • findPage() is available in Python. #19469
  • The source-page chooser shows internal names.
  • DXF export warns about Draft views from both entry points. #20960

Fixes

  • Fixes in the New Page dialog; template field keys are cleared when it is rejected.
  • Template field editors open only for the left mouse button. #28631
  • Annotations keep consecutive spaces. #33863
  • Empty annotations are skipped in DXF export.
  • Linear tolerances are formatted in the nominal dimension unit. #29490
  • Axonometric dimensions keep every precision digit and integer zeros.
  • Square detail tools align with the base view X direction. #33832
  • A detail view is computed only once without the GUI, and deleting a view while its task runs no longer aborts. #33900
  • Locked view positions stay in sync with model coordinates. #30723
  • Moving views are included in undo.
  • Leader, section, view creation and welding symbol tasks close when undo removes their object.
  • Deleting views and pages removes their dependents. #33799
  • No more endless loops or stack overflows on looping sections, collections, leaders and annotations.
  • Tab order in the Section View task follows the visual order. #30833
  • Section edge selection is retained during selection updates. #31885
  • Native sketch section profiles are located globally. #33766
  • Dimension references keep SavedGeometry without geometry. #30168
  • Dimension owners refresh when tree claims change. #24110
  • Dimension references accept valid 3D edges and vertices.
  • Cosmetic vertex, center line, format and edge Python wrappers are invalidated on deletion. #33806
  • Single-center cosmetic circles get a safe radius. #18850
  • Copied B-spline pole arrays stay in bounds. #33753
  • Rendered styles set through Python are synchronized. #24092 #33075
  • Bitmap hatch textures no longer use invalid brush styles. #26802
  • Captions no longer mark the document modified. #33149
  • Caption placement is guarded while restoring a page. #33134
  • Unshown pages are built before export. #33798
  • Toolbar DXF export keeps pending edits. #19224
  • Invalid projection group anchors are rejected safely. #32829
  • Bolt Circle skips stale selected edges; chain alignment, line extension, dimension formatting and other tools keep pending edits on an unsuitable selection.
  • Pages without templates are skipped when filling fields; quoted PDF paths are preserved; spreadsheet labels are escaped in generated SVG.
  • Many input checks to stop crashes on invalid selections, absent projections, unattached views and null edges.

Part, PartDesign and Surface

New

  • Surface: Gordon surfaces from curve networks.
  • Surface: freehand B-spline drawing and editing.
  • Surface: intersection curves.
  • PartDesign: Pad and Pocket up to a vertex or datum point. #5724
  • PartDesign: optionally remember the last used Pad/Pocket length. #29660
  • PartDesign: the Hole task panel shows the thread pitch. #15731
  • PartDesign: Set Tip on the Body’s Origin. #25185
  • PartDesign: new features inherit the body line width and point size. #31068
  • PartDesign: the clone body gets the colors of the cloned object. #11011
  • PartDesign: linear pattern suppression indices are exposed. #33160
  • PartDesign: tooltips on the Thickness panel controls. #23801
  • PartDesign: the Body and Feature Python types are exposed in the module. #18201
  • PartDesign: the Body chooser reveals the suggested Body. #24813
  • Part: symmetric option for linear and polar patterns. #10442
  • Part: per-edge line patterns and widths.
  • Part: Extrude checks “Create solid” for face profiles. #31754

Fixes

  • PartDesign: pipes keep profile islands along a closed path. #24996
  • PartDesign: a pipe uses the whole sketch when one of its edges is picked. #33966
  • PartDesign: a pipe ignores isolated points of its spine sketch. #26853
  • PartDesign: a failing pipe reports its real error. #28860
  • PartDesign: refine keeps the valid shape when refining breaks it. #32645
  • PartDesign: a Pocket without a base shape no longer becomes additive. #28712
  • PartDesign: Pad, Pocket, Revolution and Groove no longer grow their sketch. #33926
  • PartDesign: Booleans recompute when their Body moves. #33343
  • PartDesign: Booleans export as their own shape. #20641
  • PartDesign: Boolean results are bounded by their displayed scene. #33335
  • PartDesign: fixed cosmetic thread clipping of reversed holes. #33321
  • PartDesign: Hole updates ThreadDiameter for the first thread size. #32406
  • PartDesign: fixed the Motorcycle 420 sprocket roller diameter. #33908
  • PartDesign: patterns survive toggling Transform body mode. #32951
  • PartDesign: standalone linear-pattern labels are placed in the editing frame. #33563
  • PartDesign: fillet and chamfer gizmos recover after invalid parameters. #33588
  • PartDesign: no more empty warnings for all-edges dress-ups. #32425
  • PartDesign: the preview style refreshes after All Edges changes. #32414
  • PartDesign: ShapeBinder highlights are restored to their source. #7342
  • PartDesign: fixed a use-after-free when cancelling a new ShapeBinder.
  • PartDesign: a temporary intermediate Loft is hidden when leaving edit. #25356
  • PartDesign: same-object face preselection is split into loft sections. #32016
  • PartDesign: LCS plane references are kept in extrusion dialogs. #30373
  • PartDesign: a foreign sketch support is not imported as base feature. #15971
  • PartDesign: the Tip is cleared when bulk removal empties a Body. #14516
  • PartDesign: Body.insertObject() rejects targets outside the Body; Pad, Pocket, patterns and MultiTransform fail cleanly on NaN, infinite or self-referencing input.
  • PartDesign: Unicode face, datum, sketch and Body references are preserved in Draft, Revolution, Boolean and up-to-face.
  • Part: fixed a crash on tapered extrusion of small circles. #33427
  • Part: Face.cutHoles works with hole wires oriented like the outer wire. #29543
  • Part: toBiArcs no longer turns S-shaped spans into straight lines. #33257
  • Part: booleans no longer take a PartDesign feature out of its Body. #20735
  • Part: Slice apart gives one object per piece for nested compounds. #30143
  • Part: a solid Loft from open sections reports an error. #31307
  • Part: 2D offset converts offset curves to B-splines. #17708
  • Part: 2D offset of a face puts the outer wire first. #27113
  • Part: the attachment editor only adds the attach extension on OK/Apply. #33389
  • Part: Extrude Apply works after Undo. #33314
  • Part: Mirror keeps the selected occurrence when capturing a mirror plane. #32706
  • Part: CheckGeometry no longer repeats physical properties of solids. #28643
  • Part: per-object tessellation is kept when Preferences close unchanged. #33020
  • Part: stale triangles are discarded when resizing face overlays. #30889
  • Part: the edge color array is sized to the number of lines. #23346
  • Part: no crash setting PreviewColor before the preview is attached. #33161
  • Part: makeSpiralHelix no longer loops on huge turn counts; Python methods raise ValueError for NaN parameters, null shapes and non-finite values.

Interface and core

New

  • Recompute All command. #17589
  • Preference to show the placement and sketch plane on selection. #19878
  • Collapsed property groups show an indicator. #23967
  • Std_Group moves the selected objects into the new group. #22091
  • Double-clicking geometry objects honours the user edit mode. #12124
  • Editing an image plane shows the transform dragger. #34003
  • Saved files can be revealed in their Windows folder. #31500
  • Python files opened from disk show only their file name on the tab. #16237
  • The expression completer offers extension properties. #18687
  • A reusable layer list widget (used by Sketcher layers).
  • Tooltips describe the link group kinds and LinkMode/LinkTransform. #15077
  • Plain status bar tips are derived from rich text tooltips. #9296

Fixes

  • Stack overflows fixed for links that reference themselves or each other.
  • Objects deleted by recompute observers stay alive until the recompute ends. #27781
  • Closing a document from inside its own recompute is refused.
  • A failed Save As no longer renames the document. #32482
  • Hidden documents stay hidden on restore. #33181
  • XLink paths stay relative to the owner during its first save. #33468
  • Relative document arguments are resolved before registering file paths. #28683 #33468
  • A changed linked document that is already open is detected on restore. #25295
  • Copied objects no longer share an included file. #11151
  • An empty label resets to the object name. #26323
  • Link labels stay unchanged on undo and are not rebuilt from the link itself.
  • getParent returns the innermost group inside an App::Part. #19600
  • The LCS placement applies to its axes and planes. #22618
  • Quantity expressions keep parentheses around powers. #12173
  • Dimensionless Quantity exponents are accepted for numeric bases. #11810
  • Yaw/roll set through an expression are wrapped instead of rejected. #12193
  • Integer, float, enumeration and matrix properties reject overflow and failed conversions before changing anything.
  • Additions of locked dynamic properties can be undone. #32285
  • Expression backlinks are removed when deleting dependents. #33685
  • Project merges follow relabeled objects in label references. #6284
  • Project Utility handles existing sub-directories and no longer keeps archives locked after a failure. #9714
  • Configuration migration works with non-ASCII user directories. #28292
  • Standard user directories use native separators. #18027
  • Command-line Python scripts run as main. #31734
  • Python commands record importable package module names. #12604
  • Crash fixes for selection gates without a view, task dialogs used after closing, SelectionFilter gates and unusable Python objects.
  • Returning to the task watcher happens before removing the visible dialog. #31385
  • The camera no longer hangs with a zero-duration animation; viewer isSpinning() fixed. #32771
  • 3D view callbacks can be removed with an equal callable. #19379
  • Postponed gesture events are consumed before scene callbacks. #33461
  • Portrait overlay coordinates map to viewport pixels. #33496
  • Navigation preference signals are not reconnected on reload. #23304
  • An existing document view is activated from a passive MDI window. #30415
  • The active object highlight is kept in the tree after edit mode. #15819
  • An active object reached through a collapsed link is shown in the tree. #17904
  • Tree icons refresh when their size preference changes. #15873
  • Array element eyes toggle through their immediate owner. #32386
  • The selected object inside a linked container is toggled. #21823
  • Selection view keeps row identity across display labels. #31165
  • Selection view restores rows when clearing its search. #30009
  • Typed selections are restricted to the requested document. #33696
  • Escape cancels editor-owned property changes. #30992
  • Deferred string values commit when adding a property. #33394
  • Unicode enums and multiline property strings are preserved. #14119 #32820
  • Expression quantities commit with their required unit. #32968 #33098
  • Typed same-object qualifiers are kept in expression completion. #33342
  • Expressions stored in a variable set are initialized immediately. #27997
  • Property items keep the real property name as identifier. #33853
  • Selected properties refresh when returning to their document. #33356
  • Stale datum label geometry is discarded when arrays shrink. #33574
  • Explicit editable datum label colors are honoured. #33928
  • Focused combo boxes receive typed letters before shortcuts. #27018
  • Space presses a focused button when there is a selection. #33204
  • Shortcut matching finishes before delayed commands run. #33598
  • Macro shortcuts update when their key is replaced. #14824
  • The shortcut timeout default is restored when its preference is removed; macro filenames are preserved in customization.
  • Group command tooltips no longer show the title twice. #29587
  • Python group command tooltips show the active tool once. #24639
  • Cancelling the placement dialog no longer aborts other commands. #27865
  • A wait cursor is not resumed when no WaitCursor owns it. #31637
  • Application visibility is preserved while restoring Python view proxies. #33675
  • Embedded text documents stay clean when opened. #13755
  • The preferences search popup stays next to the search box. #22289
  • Measurement annotations stay out of clipping planes. #22542
  • Std_LinkImport only hides the top imported objects. #28656
  • The VTK version is no longer reported for Zipios. #33004
  • Dock visibility preferences apply to dock containers; menu actions are guarded across modal file pickers; workbench identity is kept around temporary selector tabs.

Draft and BIM

New

  • Draft: a Use Print Color column in the Layers manager. #17953
  • Draft: AddToGroup and AddToLayer grey out invalid targets. #28476
  • BIM: new windows, doors and boxes go in the active group. #24581
  • BIM: BIM_Library insertions can be undone. #31879
  • BIM: custom property sets without the Pset_ prefix. #20352
  • BIM: the legacy IFC importer works with IfcOpenShell 0.8. #33854
  • BIM: empty BuildingParts are converted to strict IFC. #24926
  • BIM: stair stringer profiles and cut stringer joinery cleaned up.
  • Start: the 2D Draft button honours the Draft default working plane. #16224

Fixes

  • Draft Trimex: fixed an error when a value is typed before moving the mouse. #33411
  • Draft Trimex: fixed arcs with a rotated placement. #22913
  • Draft Trimex: Undo restores the shape, and wire start and end are kept. #19189
  • Draft: fixed BIM horizontal/vertical dimensions on a preselected edge. #29766
  • Draft: Dimension and Stretch ignore mouse events during MouseDelay. #19531
  • Draft: fixed the OCC version check in SVG export of arcs. #33345
  • Draft: SVG import no longer loops on recursive use tags.
  • Draft: DWG export falls back to the next converter. #31835
  • Draft: offsetting a BSpline by its points ignores OCC mode. #17429
  • Draft: the ShapeString task panel uses the new arguments. #33306
  • Draft: the tray is disabled when no document is open. #33117
  • Draft: the selection callback is removed when a waiting tool is closed. #33096
  • Draft: a link array using itself as Base is rejected.
  • BIM: Arch_Reference of a whole object no longer duplicates Body features. #27170
  • BIM: whole-file external references skip hidden objects. #23142
  • BIM: Arch Reference shows again after leaving Lightweight mode. #26091
  • BIM: BIM_IfcQuantities exports every quantity. #21361
  • BIM: IFC properties without NominalValue no longer fail. #31872
  • BIM: IFC export places nested Part_Compounds correctly. #9324
  • BIM: IFC export skips base objects of App::Part children. #28368
  • BIM: NativeIFC hybrid save marks the document modified. #16410
  • BIM: a window without a base no longer breaks its host wall. #20417
  • BIM: custom-spaced rebars are not rotated by the host rotation. #33459
  • BIM: BIM_Box numeric length works without moving the cursor. #33657
  • BIM: BIM_Box point input ends when the height is entered. #33665
  • BIM: Covering Monolithic Length/Width edits apply. #30773
  • BIM: the Site wind rose rebuilds when SolarDiagramScale changes. #21979
  • BIM: BIM_Setup offers the same licenses as the preferences. #22995
  • BIM: the solid renderer keeps unrelated faces when z-sorting. #32647

Other workbenches

Measure

  • New: a Material button in Mass Properties; Measure works on linked geometry.
  • New: the length label is attached to the edge midpoint. #28930
  • Distance annotations honour the display unit. #33714
  • Scaled nested links keep their full transform. #29822
  • Return commits an active editor. #16482
  • Callbacks outside the task’s document are ignored. #33581
  • Mass results use the shared measurement group provider. #28644
  • No more crashes on missing angle or measurement elements; three-point angles use the third reference; small density values are preserved.

CAM

  • Boundary dressup works on an Array operation. #11180
  • Tag dressup Create replaces its base operation in the job. #33599
  • Cancelling a new LeadInOut dressup no longer creates it. #6849
  • Spiral facing reaches the center with a large stepover. #33940
  • Very short arcs no longer become half circles. #33146
  • Full circle arcs with coinciding endpoints are recognized. #32741
  • XY moves before leading Z rapids after a tool change. #33635
  • The V-bit half angle is passed to OCL in radians. #33640
  • The simulator draws rapid moves and path width from the preferences. #22186
  • The Job tool table stays current while the Job panel is open. #33773
  • uccnc legacy post: arc I/J/K in output units, rotary axes not converted to inches. #30603
  • Delete in the Base Geometry list removes the entry. #13877
  • Area wire rebase fixed on edges whose vertices are off the curve ends. #33344

FEM

  • New: node groups exported to xdmf. #22762
  • No crash on constraint references without a Part shape. #23834
  • Importing the VTK compatibility check no longer terminates FreeCAD. #33583
  • The temporary zip no longer leaks when restoring post data. #33360
  • Saving meshes works when the temporary path is not ASCII. #29274
  • Exact frame values are kept when importing CalculiX frd results. #23083
  • getNodesBySolid keeps nodes just inside the solid. #33842
  • Missing CalculiX prerequisites are reported again. #23085
  • Fixed a crash with a non-filter object in a branch filter group; post-processing groups cannot contain themselves.

Spreadsheet

  • New: shared formulas imported from XLSX. #20299
  • New: black text and white background colors allowed. #24481
  • New: Edit > Select All, Cut, Copy and Delete act on cells. #13393
  • setForeground/setBackground accept None. #11865
  • Aliases that move back on undo of row changes are kept. #7511 #29862
  • Alias dependants refresh when an alias changes cell. #18207
  • Default cell colors are kept on undo. #30477
  • Merged cell spans are fixed when removing rows/columns after them; inserting or removing zero rows is ignored.

Mesh, Points and Inspection

  • Mesh: invalid point indices in inline XML meshes are rejected. #33322
  • Mesh: many crash fixes for corrupted OFF files, invalid facet indices, huge coordinates and stale facets; Mesh.export() errors become Python exceptions; loftOnCurve no longer crashes on degenerated edges.
  • Points: PCD and reader errors become Python exceptions; inspection no longer hangs in console mode.

Import

  • DXF: free-standing points are exported. #30675
  • DXF: imported polylines use the OCS. #17046
  • DXF: C++ export keeps the sketch placement. #17962
  • DXF: imported texts ignore the annotation scale multiplier. #30043
  • DXF: blocks that insert themselves no longer overflow the stack.
  • STEP/IGES export modules survive a language change. #33912
  • Color components are clamped on export. #33758

Material, Robot, OpenSCAD, Help

  • Material: canceled 2D array edits are discarded. #13343
  • Material: the legacy ShapeMaterial attribute is kept on link view providers. #30978
  • Material: out-of-bounds access in Array2D/Array3D fixed; 2D array assignment replaces existing rows.
  • Robot: the robot is drawn at its Placement. #15014
  • Robot: the tool is placed relative to the placed robot. #5562
  • Robot: crash and endless loop fixes in Trajectory.
  • OpenSCAD: boolean feature placements are exported to CSG. #33826
  • OpenSCAD: zero-radius faceted cylinders are imported as pyramids. #11900
  • OpenSCAD: Base and Tool are evaluated only for binary intersections. #29309
  • OpenSCAD: sources of non-parametric matrix copies stay hidden. #13069
  • OpenSCAD: dependencies of uncomputed CSG children are recomputed. #31390
  • Help: documentation requests time out instead of freezing. #32052
  • Help: the English URL fallback is kept on network errors. #32023

Packaging

  • Updated OndselSolver; macOS build fixes; the Linux AppImage gets a PNG icon.

One response to “AstoCAD 2026.11.01 changelog”

Leave a Reply